With split system air conditioning, the indoor unit is separated from the outdoor components or else the condenser. Split simply means separation and therefore the condenser is placed in a convenient place on the outside either on the ground or hanged up on the walls. In large buildings they are positioned in groups but each has its own features depending on the model.
There are some vital factors which one requires to consider before deciding on the type to buy. One of those factors is to determine the number of inside units required for the whole building. Normally one room is served by a single unit although several may be cooled in homes with wide open areas.
The condenser is connected to the indoor unit with the help of copper pipes or electrical wires which are fitted by experienced technicians. Refrigerant gas is then pushed to the indoor units from the condenser coil but it must be passed through a compressor to increase its pressure. Cold air is quietly distributed by a fan across the evaporator coils.
Split air conditioning systems control the amount of cold air flowing into a room through thermostats or infra red remotes. Each room is designed to maintain a certain temperature depending on its use. This technique is greatly employed in residential house as the sitting room can be conditioned during the day and the bedroom at night.
This technique is currently being employed to regulate temperatures in big retail shops, hospitals, institutions of higher learning, supermarkets and several other areas. The sitting room can be conditioned during the day and the bedroom at night. Since decent buildings demand more space which might not be available, exceptional and modular purpose offices might be installed.
Split air conditioning systems have been installed in several places across the world in places like hotels, shops and offices. It has several benefits compared to other methods. The system is cheaply maintained, has an attractive design and also easily maintained and operated. Washable filters are used and are cleaned after a certain period of time.
In split system air conditioner, the condenser can even be positioned outside the office and connection pipes be run to the room. Air is distributed in the room through then ceiling units or pipes which are fitted on the walls. This technique does not require much duct work or distribution knowledge and because of this it can be installed in a number of areas.